Lifting hoops
![](/assets/0/0/0/0/0/0/1/0/1/5/T-040 Drahtseilabhebeschlaufe_600x600.png)
Cast-in lifting hoop type AS 0.8 - AS 25.0
Cast-in lifting hoops convince by their simplicity and use in various concrete elements, such as wall-like elements, columns, bar-shaped elements, beams and girders. Used wire-rope is bonded and forms a loop which encloses a concrete core – thus it enables high load-bearing capacities for this transport anchor type. A special lifting device is not required for transport and mounting of the elements. Moreover, Cast-in lifting hoops also offer high performance at a low price and thus combine many advantages.
![](/assets/0/0/0/0/0/0/1/0/1/6/T-041 Drahtseilabhebeschlaufe_600x600.png)
Cast-in lifting hoop type AS 28.0 - AS 95.0
If very heavy or massive concrete elements (hall girders and beams, columns, bridge elements etc.) have to be lifted, transported and mounted, the use of Cast-in lifting hoops for the heavy load range up to 95 t capacity is obvious. Used wire-rope is bonded and forms a loop which encloses a concrete core – thus it enables very high load-bearing capacities for this transport anchor type. Although this heavy-duty anchor is always combined with an individual design service from PHILIPP, the Cast-in lifting hoop in this application area is nevertheless convincing with an unbeatable price / performance ratio.
![](/assets/0/0/0/0/0/0/1/0/1/8/T-063 Seilschutzrolle_600x600.png)
Wire protection pulley
The Wire protection pulley is an accessory for the Cast-in lifting hoop and is used to protect the wire resp. to ensure the capacity of the anchor during lifting. It is available as a steel or high quality plastic (POM) version and avoids a strong deformation of the wire rope caused by too small radii at the loading point.
![](/assets/0/0/0/0/0/0/1/4/8/5/T-078 Drahtseilabhebebox_600x600.png)
Cast-in lifting box
With a flexible end anchorage, the Cast-in lifting box shows its potential especially in wall elements with fragile structural areas, such as slender webs or narrow lintel areas. The easy handling and direct attachment without a lifting device offer a low-price and high-performance solution for small to medium-sized reinforced concrete elements. With the combination of know-how in connection technology and mechanisms of common transport anchors, an anchor type with the usual high quality and safety standards is available.
![](/assets/0/0/0/0/0/0/1/5/1/3/V-086 Seilanker - gekröpft_600x600.png)
Loop anchor with offset
The Loop anchor has been developed for light, thin-walled and possibly stackable elements. With a deep anchorage and a little offset, this anchor adapts to the geometric conditions and allows a direct attachment without any special lifting device.
![](/assets/0/0/0/0/0/0/1/0/1/7/T-042 Polypropylenschlaufe_600x600.png)
Polypropylene lifting hoop
The loop made of Polypropylene (PP) is the cheap and simple solution for lifting of small slab-like or wall-like precast concrete elements. Due to the additional anchorage reinforcement to be planned, a load capacity up to 1.2 t per anchor is possible. A special lifting device is not required for transport and mounting of the elements.
![](/assets/0/0/0/0/0/0/1/4/0/6/T-043 Winkelschlaufe_600x600.png)
Angled loop
The application of the Angled loop is focused on light, slab-like precast concrete elements, hollow core floors etc. This anchor type, which is easy to install and to fix to the reinforcement, can be used without a special lifting device. The unbeatable price/performance ratio of the Angled loop makes it very attractive for precasters.