Plastic recess former SL
![](/assets/0/0/0/0/0/0/1/7/6/8/72KHN..SL_600x600.png)
The Plastic recess former SL is used to fix the Threaded transport anchor SL to the mould tightly. This can be done either by nailing or hot gluing of the Nailing plate SL before the anchor is screwed on.
![](/assets/0/0/0/0/0/0/1/0/0/0/T-014 Seilschlaufe mit Gewinde_600x600.png)
Lifting loop with threaded end
For the complete range of PHILIPP Threaded transport anchors the Lifting loop with threaded end, consisting of a galvanised wire rope, can be used for axial and diagonal tension.
![](/assets/0/0/0/0/0/0/0/9/8/8/T-017 Lifty_600x600.png)
Lifty
For a daily use in the precast plant or on the construction site the Lifty is a robust and universally applicable lifting device for the PHILIPP threaded anchor system. It consists of a forged ring bolt with a welded chain link, both galvanised.
![](/assets/0/0/0/0/0/0/0/9/8/9/T-018 Lifty verseilt_600x600.png)
Lifty DS
The Lifty DS with wire rope is a universally applicable lifting device for the PHILIPP threaded anchor system. It consists of a forged ring bolt with a thread and galvanised pressed-steel wire rope.
![](/assets/0/0/0/0/0/0/1/4/7/2/T-064 KHN-System_600x600.png)
KHN system
The KHN system is the most versatile system of recess formers and lifting devices that can be used. On applications around the universal lifting device Lifty resp. Lifty with wire rope the main focus is set here.
![](/assets/0/0/0/0/0/0/0/9/8/4/T-020 Kennzeichnungsring mit Clip_600x600.png)
Marking ring with clip
A marking ring identifies a threaded anchor in installed condition and fixes the position of an additional reinforcement by its clip.
![](/assets/0/0/0/0/0/0/0/9/8/3/T-019 Kennzeichnungsring_600x600.png)
Marking ring
Both, the identification of a threaded anchor in installed condition as well as a quick assignment to the corresponding lifting device is done by the marking ring with its color-code.
![](/assets/0/0/0/0/0/0/0/9/8/7/T-023 Kunststoff-Abdeckstopfen_600x600.png)
Sealing cap (plastic)
Sealing caps (plastic) close threaded inserts of all sizes independent of a recessed or surface-flush installation of the anchor.